Easy Colorblock Knitted Washcloths (or Dishcloths)

Easy Knitting Colorblock Washcloths-6 designs shown

Whether you use them as dishcloths or as washcloths, knitted squares are a useful and popular project for knitters of all skill levels. Who doesn’t love a beautiful, soft hand-knit cloth to pamper their face, or a cute and sturdy cloth for that thankless chore that is kitchen cleanup?

This collection of six knitted washcloths (or dishcloths) helps you brush up on your knitting skills.  Links to video tutorials help you with unfamiliar techniques. 

Easy Knitting Colorblock Washcloths or Discloths-6 designs shown

With these patterns, knitting garter stitch was never so rewarding! Relax into the meditative rhythm of all-over knit stitches and enjoy the beauty of color. 

Beginning knitters will be comfortable knitting stripes, then progress to knitting on the bias. After that, step up to the joy that is a mitered square. Garter stitch intarsia techniques take you from beginning to intermediate skills in easy steps. There’s no purling needed!

This post contains affiliate links, which help support me but don’t cost you anything extra. Many thanks to Trailhead Yarns, who provided the yarn for this project. 

Easy Knitted Colorblock Washcloths by Edie Eckman- rolled up

The free pattern for the easiest cloth, Team Colors, is presented below. Buy a printable downloadable pdf of all six patterns, and knit your cares away.

CTA Buy the Pattern

The Yarn

Use a cotton or cotton-blend fine- or light-weight yarn to make these soft and absorbent projects. The pattern calls for five colors, so this is a perfect time to try out a colorful pack of mini skeins!

Basket of 5 colors of yarn ready to knit

For the cloths pictured I used Trailhead Yarns Appalachian Trail Yarn Crew mini-skeins. Appalachian Trail is 65% cotton, 35% nylon. I used about 108 yds [99 m] each of five colors to complete all six washcloths. 

Other knitters who tested the pattern had good success with Cascade Ultra Pima Fine, Ultra Pima DK, or Premier Yarns Cotton Fair.


Finished Dimensions

The finished size will vary based on the yarn and needles you use, and your particular gauge. The washcloths shown measure about 6 3/4″ [17 cm] square. 

Size is not crucial in this project, but if you substitute yarns, choose a needle size that results in a fabric that is not too dense and not too loose.

Easy Colorblock Washcloths arranged in a basket

Materials

Fine-weight yarn: approximately 40 yds [36.5 m] each of two colors (Color A & Color B) for the Team Colors cloth below.

US size 2 [3 mm] knitting needles or size to obtain appropriate gauge

Gauge

30 sts and 22 rows = 4″ [10 cm] in garter stitch in fine-weight yarn

See note above about gauge.

Instructions

Team Colors

With Color A, long-tail cast on 50 stitches.

Rows 1-23: Knit. You have 12 garter stitch ridges. Cut A.

Rows 24-75: WIth Color B, knit. You have 26 garter stitch ridges in B, Cut B.

Rows 76-99: With Color A, knit. You have 12 garter stitch ridges in A. 

Bind off. Weave in ends. 

What’s Next?

Knit: Basics & Beyond offers links to help you improve your knitting skills.

Check out these other easy knitting patterns:

My First Scarf
Easy Two-Toned Pillow
Quick & Easy Summer Placemats

How to Knit Intarsia in Garter Stitch

Garter Stitch Intarsia
Garter Stitch Intarsia Swatch

Intarsia knitting can be a fun color knitting technique! The trick is in understanding how to prevent holes at the color changes. While a lot of intarsia projects are knitted in stockinette stitch, it’s easy to do in garter stitch if you know how.

Let’s work through this simple intarsia sample together, and I’ll show you how wonderful it can be to knit intarsia in garter stitch. Scroll down to the bottom of the post for a video.

This post may contain affiliate links which may provide a small income to me if you buy something, but don’t cost you anything.

What is Intarsia Knitting?

Intarsia is a color knitting technique that uses one yarn color at a time to create blocks of color. You work across stitches in one color, then drop the old color and pick up the new color to begin working the next stitches.

The yarns are twisted around each other at the color change to prevent holes.

Compare this to stranded knitting techniques where you hold multiple colors across a row, or slip stitch techniques which use just one yarn and just one color across the entire row.

yarn balls and yarn butterfly
I’m using three colors. The pink is wound into a yarn butterfly.

You can use separate full balls of yarn, or wind your yarn into yarn butterflies or yarn bobbins.

In this sample I used full balls for the blue and the green and a yarn butterfly for the pink. I’m using Marly Bird’s Chic Sheep from Red Heart, and Clover Takumi bamboo knitting needles, size 5 mm.

Intarsia in Stockinette Stitch vs. Garter Stitch

If you’ve never done intarsia before, it can seem intimidating. Just remember that you are only holding one strand of yarn at a time, so how hard can it really be?

There’s a simple rule for remembering how to twist the yarns at the color change:

  • Hold the old color to the left
  • Pick up the new color from underneath (and to the right of) the old color
  • Begin working with the new color.

The trick is to cross the yarns on the wrong side at each color change to prevent a hole. In stockinette stitch this becomes intuitive, because the yarn is just where it needs to be, at the front or back of the knitting, as you come to it. In garter stitch, however, when you are knitting wrong side rows, you have to bring the yarn forward between the needles to allow that yarn crossing to happen on the wrong side.

Confused? Me too. I’d rather show you.

Reading a Chart

Garter stitch is usually worked from a chart. While there are different ways of presenting the information for a garter stitch chart, we’ll be working from this one.

Intarsia in Garter Stitch chart

I’ve made a printable pdf of the chart available to make it easier for you to follow along.

Download the PDF for chart Button

This chart is read in the ordinary way, with each rectangle representing a stitch. Right side (odd-numbered) rows are worked from right to left and wrong side (even-numbered) rows are worked from left to right. Note that all the rows are knit.

Intarsia in Garter Stitch chart

Cast On and Row 1

Garter Stitch Intarsia Cast on and Row 1
Cast on 10 stitches in each color.

You’ll read the chart beginning with Row 1, a right side row. If you use a long-tail cast on, you can count the cast on as Row 1. This is what I like to do when working garter stitch.

Using a long-tail cast on, cast on 10 stitches in blue, then 10 stitches in green. At this point, the cast ons will not be connected to each other.

Row 2

Row 2 is a wrong side row, read from left to right. Knit 10 stitches in green.

Garter Stitch Intarsia Row 2, photo 1
Bring old color between needles to the front.

Now that you’ve finished with the green for this row, it’s time to change to blue, but you need to twist the yarns to prevent a hole. This twist needs to happen on the wrong side. Since this is a wrong side row, that means that the twist needs to happen on the side closest to you.

Garter Stitch Intarsia, Row 2, photo 2
Pick up new color from underneath so that the old color crosses over the new color.

Bring the old color (green) to the front between the needles. Hold it to the left. Pick up the new color (blue) from underneath the old color and bring it between the needles to the back.


Bring new color to the back and knit with new color.

Begin knitting with the new color, and knit to the end of the row.

Row 3

Garter Stitch Intarsia, hold old color to the left
On right side rows, hold old color to the left.

This is a right side row, and the color change will happen on the back (wrong side). Knit 10 with blue, then hold the old color (blue) to the left


Garter Stitch Intarsia Pick up new color from underneath old color.
Pick up new color from underneath old color.

and pick up the new color (green) from underneath the old color. Knit 10 with green.


Row 4

Once more on a wrong side row, for good measure: Knit 10 blue, bring yarn forward between the needles. Hold the blue to the left. Pick up the green from underneath the blue and bring the green to the back. Knit 10 with green.

Row 5

Garter Stitch Intarsia Add pink on Row 5
Add pink on Row 5.

It’s time to add a third color! Knit 9 stitches in blue. Leaving a long tail, knit 2 stitches in pink. Hold the pink to the left and pick up the green from underneath, knit 9 stitches in green.

Rows 6-24

Work in pattern according to the chart, crossing the yarns when the colors change.

Bind Off and Weaving In Ends

Garter Stitch Intarsia Bind off closeup
Knit the last stitch of the blue with green yarn.

Bind off on a right side row, using the following trick to make sure you maintain a clean color transition. Beginning with blue, bind off until there is 1 blue stitch on your right needle and 1 blue stitch on your left needle.



Garter Stitch Intarsia completed bind off
This bind-off method prevents the blue from creeping into the green section.

Knit the next stitch in green (turning the blue stitch into a green stitch). Continue binding off in green.


Garter Stitch Intarsia Weave in ends.
Weave in ends.

Use the remaining pink tails to close up the holes at the beginning and end of the diamond, then weave in those ends on the wrong side of the pink section. Weave in remaining ends.

What are you going to knit next? Will you give garter stitch intarsia a try?